Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.
Whether it’s a simple DSLR or a professional camera with cinema grade glass with all the accessories mounted, Ronin 2 will stabilize the build.
Higher Torque, More Power, Same Precision
With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75mph with camera builds as heavy as 30lbs. We’ve increased power without sacrificing control. With encoded motors and extreme precision, the same 0.02° of accuracy remains.
With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.
The new Remote Controller provides dedicated controls for joystick input speed and start/stop recording. Besides this, Ronin 2 is also compatible with third party remote controllers such as hand wheels and traditional remotes through the onboard D-Bus port.
A newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed. Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams, and more.
The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.
Making fine adjustments, which is essential for proper camera balancing, is now simplified with integrated adjustment knobs and a re-designed camera mounting base.
Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.
Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.
Two batteries on Ronin 2, and the ability to run with only one allows batteries to be charged and swapped without interrupting a shoot.
Installed cameras, monitors, or accessories, including the DJI Focus, can be powered by Ronin 2 batteries through integrated cabling and ports, eliminating dangling cables.
Every element of Ronin 2 has been designed to maximize reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.
Carbon Fiber Build
A carbon fiber build enables Ronin 2 to perform well in extreme weather conditions. Light and durable, it is reliable in the most testing scenarios.
Robust and resilient in extreme weather conditions, Ronin 2’s self-heating batteries ensure stable power output for high-performance in temperatures as low as -4°F (-20°C) and high heat environments. Dual batteries capable of operating simultaneously and independently provide complete redundancy, keeping the shoot going.
The built-in GPS provides Ronin 2 with essential information for gimbal acceleration and speed, which is crucial for maintaining the camera’s position and the horizon level when moving at high speeds.
In The Box
Ronin 2 Gimbal x1
Carrying Case x1
Ronin 2 Power Hub x1
Camera Mounting Plate x1
Camera Upper Mounting Plate x1
Remote Controller x1
Battery Compartment x1
Intelligent Battery (TB50) x2
Battery Charger x1
Power Cable x1
Charging Hub x1
Accessories Package (Screws & Hex Keys) x1
Cables Package (Red Power Cable, Arri Power Cable, 2-pin Power Cable, DC Power Cable, 6-pin-to-P-tap Adapter, USB Type-C Data Cable, Control Cable for Red, Control Cable for Arri, Ronin 2 Power Cable, S-Bus Receiver Cable) x1 each
Manual Package x1
Monitor Mounting Bracket x1
15mm Rod Mount x1
15mm Extension Rod x2
Ronin 2 Universal Mount x1
-Handheld, Car Mount, Aerial & Tripod Mode
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
USB Type-C Connection
Power and Video Signal through Slip Ring
Mechanical & Electrical Characteristics
Working Current Static current: 300 mA (@22.8 V), Dynamic current: 500 mA (@22.8 V), Locked motor current: Max 15 A (@22.8 V)
Run Time 8 hours, 2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature -4°F ~ 122°F (-20°C ~ 50°C)
Weight Including handle bar: 14 lb (6.3 kg), Excluding handle bar: 11 lb (5.0 kg)
Gimbal Dimensions Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H), Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 250 mm, Maximum height measured from top of the camera base plate: 190 mm, Maximum width: 170 mm
Accessory Power Connections 14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input Power Intelligent Battery: 4280 mAh-22.8 V
Connections 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software Requirements Windows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software Requirements iOS 9 or above; Android 4.4 or above
Load Weight (Reference Value) 30 lbs (13.6 kg)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 400°/s, Tilt axis: 360°/s, Roll axis: 360°/s
Mechanical Endpoint Range Pan axis control: 360° continuous rotation, Tilt axis control: ±135°, Roll axis control: ±220°
Controlled Rotation Range Pan axis control: 360° continuous rotation, Tilt axis control: ±135°, Roll axis control: ±30°